224 lines
12 KiB
C
224 lines
12 KiB
C
//###########################################################################
|
|
//
|
|
// FILE: hw_eqep.h
|
|
//
|
|
// TITLE: Definitions for the EQEP registers.
|
|
//
|
|
//###########################################################################
|
|
// $Copyright:
|
|
// Copyright (C) 2022 Texas Instruments Incorporated - http://www.ti.com
|
|
//
|
|
// Redistribution and use in source and binary forms, with or without
|
|
// modification, are permitted provided that the following conditions
|
|
// are met:
|
|
//
|
|
// Redistributions of source code must retain the above copyright
|
|
// notice, this list of conditions and the following disclaimer.
|
|
//
|
|
// Redistributions in binary form must reproduce the above copyright
|
|
// notice, this list of conditions and the following disclaimer in the
|
|
// documentation and/or other materials provided with the
|
|
// distribution.
|
|
//
|
|
// Neither the name of Texas Instruments Incorporated nor the names of
|
|
// its contributors may be used to endorse or promote products derived
|
|
// from this software without specific prior written permission.
|
|
//
|
|
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
|
|
// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
|
|
// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
|
|
// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
|
// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
|
// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
// $
|
|
//###########################################################################
|
|
|
|
#ifndef HW_EQEP_H
|
|
#define HW_EQEP_H
|
|
|
|
//*************************************************************************************************
|
|
//
|
|
// The following are defines for the EQEP register offsets
|
|
//
|
|
//*************************************************************************************************
|
|
#define EQEP_O_QPOSCNT 0x0U // Position Counter
|
|
#define EQEP_O_QPOSINIT 0x2U // Position Counter Init
|
|
#define EQEP_O_QPOSMAX 0x4U // Maximum Position Count
|
|
#define EQEP_O_QPOSCMP 0x6U // Position Compare
|
|
#define EQEP_O_QPOSILAT 0x8U // Index Position Latch
|
|
#define EQEP_O_QPOSSLAT 0xAU // Strobe Position Latch
|
|
#define EQEP_O_QPOSLAT 0xCU // Position Latch
|
|
#define EQEP_O_QUTMR 0xEU // QEP Unit Timer
|
|
#define EQEP_O_QUPRD 0x10U // QEP Unit Period
|
|
#define EQEP_O_QWDTMR 0x12U // QEP Watchdog Timer
|
|
#define EQEP_O_QWDPRD 0x13U // QEP Watchdog Period
|
|
#define EQEP_O_QDECCTL 0x14U // Quadrature Decoder Control
|
|
#define EQEP_O_QEPCTL 0x15U // QEP Control
|
|
#define EQEP_O_QCAPCTL 0x16U // Qaudrature Capture Control
|
|
#define EQEP_O_QPOSCTL 0x17U // Position Compare Control
|
|
#define EQEP_O_QEINT 0x18U // QEP Interrupt Control
|
|
#define EQEP_O_QFLG 0x19U // QEP Interrupt Flag
|
|
#define EQEP_O_QCLR 0x1AU // QEP Interrupt Clear
|
|
#define EQEP_O_QFRC 0x1BU // QEP Interrupt Force
|
|
#define EQEP_O_QEPSTS 0x1CU // QEP Status
|
|
#define EQEP_O_QCTMR 0x1DU // QEP Capture Timer
|
|
#define EQEP_O_QCPRD 0x1EU // QEP Capture Period
|
|
#define EQEP_O_QCTMRLAT 0x1FU // QEP Capture Latch
|
|
#define EQEP_O_QCPRDLAT 0x20U // QEP Capture Period Latch
|
|
|
|
|
|
//*************************************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the QDECCTL register
|
|
//
|
|
//*************************************************************************************************
|
|
#define EQEP_QDECCTL_QSP 0x20U // QEPS input polarity
|
|
#define EQEP_QDECCTL_QIP 0x40U // QEPI input polarity
|
|
#define EQEP_QDECCTL_QBP 0x80U // QEPB input polarity
|
|
#define EQEP_QDECCTL_QAP 0x100U // QEPA input polarity
|
|
#define EQEP_QDECCTL_IGATE 0x200U // Index pulse gating option
|
|
#define EQEP_QDECCTL_SWAP 0x400U // CLK/DIR Signal Source for Position Counter
|
|
#define EQEP_QDECCTL_XCR 0x800U // External Clock Rate
|
|
#define EQEP_QDECCTL_SPSEL 0x1000U // Sync output pin selection
|
|
#define EQEP_QDECCTL_SOEN 0x2000U // Sync output-enable
|
|
#define EQEP_QDECCTL_QSRC_S 14U
|
|
#define EQEP_QDECCTL_QSRC_M 0xC000U // Position-counter source selection
|
|
|
|
//*************************************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the QEPCTL register
|
|
//
|
|
//*************************************************************************************************
|
|
#define EQEP_QEPCTL_WDE 0x1U // QEP watchdog enable
|
|
#define EQEP_QEPCTL_UTE 0x2U // QEP unit timer enable
|
|
#define EQEP_QEPCTL_QCLM 0x4U // QEP capture latch mode
|
|
#define EQEP_QEPCTL_QPEN 0x8U // Quadrature postotion counter enable
|
|
#define EQEP_QEPCTL_IEL_S 4U
|
|
#define EQEP_QEPCTL_IEL_M 0x30U // Index event latch
|
|
#define EQEP_QEPCTL_SEL 0x40U // Strobe event latch
|
|
#define EQEP_QEPCTL_SWI 0x80U // Software init position counter
|
|
#define EQEP_QEPCTL_IEI_S 8U
|
|
#define EQEP_QEPCTL_IEI_M 0x300U // Index event init of position count
|
|
#define EQEP_QEPCTL_SEI_S 10U
|
|
#define EQEP_QEPCTL_SEI_M 0xC00U // Strobe event init
|
|
#define EQEP_QEPCTL_PCRM_S 12U
|
|
#define EQEP_QEPCTL_PCRM_M 0x3000U // Postion counter reset
|
|
#define EQEP_QEPCTL_FREE_SOFT_S 14U
|
|
#define EQEP_QEPCTL_FREE_SOFT_M 0xC000U // Emulation mode
|
|
|
|
//*************************************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the QCAPCTL register
|
|
//
|
|
//*************************************************************************************************
|
|
#define EQEP_QCAPCTL_UPPS_S 0U
|
|
#define EQEP_QCAPCTL_UPPS_M 0xFU // Unit position event prescaler
|
|
#define EQEP_QCAPCTL_CCPS_S 4U
|
|
#define EQEP_QCAPCTL_CCPS_M 0x70U // eQEP capture timer clock prescaler
|
|
#define EQEP_QCAPCTL_CEN 0x8000U // Enable eQEP capture
|
|
|
|
//*************************************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the QPOSCTL register
|
|
//
|
|
//*************************************************************************************************
|
|
#define EQEP_QPOSCTL_PCSPW_S 0U
|
|
#define EQEP_QPOSCTL_PCSPW_M 0xFFFU // Position compare sync pulse width
|
|
#define EQEP_QPOSCTL_PCE 0x1000U // Position compare enable/disable
|
|
#define EQEP_QPOSCTL_PCPOL 0x2000U // Polarity of sync output
|
|
#define EQEP_QPOSCTL_PCLOAD 0x4000U // Position compare of shadow load
|
|
#define EQEP_QPOSCTL_PCSHDW 0x8000U // Position compare of shadow enable
|
|
|
|
//*************************************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the QEINT register
|
|
//
|
|
//*************************************************************************************************
|
|
#define EQEP_QEINT_PCE 0x2U // Position counter error interrupt enable
|
|
#define EQEP_QEINT_QPE 0x4U // Quadrature phase error interrupt enable
|
|
#define EQEP_QEINT_QDC 0x8U // Quadrature direction change interrupt enable
|
|
#define EQEP_QEINT_WTO 0x10U // Watchdog time out interrupt enable
|
|
#define EQEP_QEINT_PCU 0x20U // Position counter underflow interrupt enable
|
|
#define EQEP_QEINT_PCO 0x40U // Position counter overflow interrupt enable
|
|
#define EQEP_QEINT_PCR 0x80U // Position-compare ready interrupt enable
|
|
#define EQEP_QEINT_PCM 0x100U // Position-compare match interrupt enable
|
|
#define EQEP_QEINT_SEL 0x200U // Strobe event latch interrupt enable
|
|
#define EQEP_QEINT_IEL 0x400U // Index event latch interrupt enable
|
|
#define EQEP_QEINT_UTO 0x800U // Unit time out interrupt enable
|
|
|
|
//*************************************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the QFLG register
|
|
//
|
|
//*************************************************************************************************
|
|
#define EQEP_QFLG_INT 0x1U // Global interrupt status flag
|
|
#define EQEP_QFLG_PCE 0x2U // Position counter error interrupt flag
|
|
#define EQEP_QFLG_PHE 0x4U // Quadrature phase error interrupt flag
|
|
#define EQEP_QFLG_QDC 0x8U // Quadrature direction change interrupt flag
|
|
#define EQEP_QFLG_WTO 0x10U // Watchdog timeout interrupt flag
|
|
#define EQEP_QFLG_PCU 0x20U // Position counter underflow interrupt flag
|
|
#define EQEP_QFLG_PCO 0x40U // Position counter overflow interrupt flag
|
|
#define EQEP_QFLG_PCR 0x80U // Position-compare ready interrupt flag
|
|
#define EQEP_QFLG_PCM 0x100U // eQEP compare match event interrupt flag
|
|
#define EQEP_QFLG_SEL 0x200U // Strobe event latch interrupt flag
|
|
#define EQEP_QFLG_IEL 0x400U // Index event latch interrupt flag
|
|
#define EQEP_QFLG_UTO 0x800U // Unit time out interrupt flag
|
|
|
|
//*************************************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the QCLR register
|
|
//
|
|
//*************************************************************************************************
|
|
#define EQEP_QCLR_INT 0x1U // Global interrupt clear flag
|
|
#define EQEP_QCLR_PCE 0x2U // Clear position counter error interrupt flag
|
|
#define EQEP_QCLR_PHE 0x4U // Clear quadrature phase error interrupt flag
|
|
#define EQEP_QCLR_QDC 0x8U // Clear quadrature direction change interrupt flag
|
|
#define EQEP_QCLR_WTO 0x10U // Clear watchdog timeout interrupt flag
|
|
#define EQEP_QCLR_PCU 0x20U // Clear position counter underflow interrupt flag
|
|
#define EQEP_QCLR_PCO 0x40U // Clear position counter overflow interrupt flag
|
|
#define EQEP_QCLR_PCR 0x80U // Clear position-compare ready interrupt flag
|
|
#define EQEP_QCLR_PCM 0x100U // Clear eQEP compare match event interrupt flag
|
|
#define EQEP_QCLR_SEL 0x200U // Clear strobe event latch interrupt flag
|
|
#define EQEP_QCLR_IEL 0x400U // Clear index event latch interrupt flag
|
|
#define EQEP_QCLR_UTO 0x800U // Clear unit time out interrupt flag
|
|
|
|
//*************************************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the QFRC register
|
|
//
|
|
//*************************************************************************************************
|
|
#define EQEP_QFRC_PCE 0x2U // Force position counter error interrupt
|
|
#define EQEP_QFRC_PHE 0x4U // Force quadrature phase error interrupt
|
|
#define EQEP_QFRC_QDC 0x8U // Force quadrature direction change interrupt
|
|
#define EQEP_QFRC_WTO 0x10U // Force watchdog time out interrupt
|
|
#define EQEP_QFRC_PCU 0x20U // Force position counter underflow interrupt
|
|
#define EQEP_QFRC_PCO 0x40U // Force position counter overflow interrupt
|
|
#define EQEP_QFRC_PCR 0x80U // Force position-compare ready interrupt
|
|
#define EQEP_QFRC_PCM 0x100U // Force position-compare match interrupt
|
|
#define EQEP_QFRC_SEL 0x200U // Force strobe event latch interrupt
|
|
#define EQEP_QFRC_IEL 0x400U // Force index event latch interrupt
|
|
#define EQEP_QFRC_UTO 0x800U // Force unit time out interrupt
|
|
|
|
//*************************************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the QEPSTS register
|
|
//
|
|
//*************************************************************************************************
|
|
#define EQEP_QEPSTS_PCEF 0x1U // Position counter error flag.
|
|
#define EQEP_QEPSTS_FIMF 0x2U // First index marker flag
|
|
#define EQEP_QEPSTS_CDEF 0x4U // Capture direction error flag
|
|
#define EQEP_QEPSTS_COEF 0x8U // Capture overflow error flag
|
|
#define EQEP_QEPSTS_QDLF 0x10U // eQEP direction latch flag
|
|
#define EQEP_QEPSTS_QDF 0x20U // Quadrature direction flag
|
|
#define EQEP_QEPSTS_FIDF 0x40U // The first index marker
|
|
#define EQEP_QEPSTS_UPEVNT 0x80U // Unit position event flag
|
|
|
|
|
|
|
|
#endif
|